Frederic Melton
In *Borderlands 2*, mastering the Digistruct Peak challenges often requires clever strategies, and one popular approach is learning how to cheese the assassins—a term gamers use to describe exploiting mechanics or glitches to gain an unfair advantage. The assassins in Digistruct Peak are notoriously tough opponents, especially at higher levels, but players have discovered various tactics to simplify the fight. These methods often involve manipulating the arena layout, using specific weapons or abilities, or exploiting enemy AI behaviors to minimize risk and maximize efficiency. Whether it’s luring them into traps, abusing environmental features, or using overpowered gear, cheesing the assassins allows players to bypass the intended difficulty and secure victory with minimal effort. This approach is particularly appealing for those aiming to complete the challenge quickly or farm rewards without the usual frustration.
| Characteristics | Values |
|---|---|
| Game | Borderlands 2 |
| Location | Digistruct Peak (Peak Challenge) |
| Target Enemies | Assassins (specifically the Invincible Assassin) |
| Cheese Strategy | Exploit map geometry or mechanics to avoid direct combat |
| Primary Method | Use the "ledge glitch" to stay out of reach |
| Required Gear | High damage weapon (e.g., Sniper Rifle, Rocket Launcher) |
| Steps | 1. Lure the Assassin to the ledge near the spawn point. |
| 2. Jump onto the ledge where the Assassin cannot follow. | |
| 3. Shoot the Assassin from safety until it dies. | |
| Alternative Method | Use the "room glitch" to trap the Assassin in a corner. |
| Notes | These methods may require precise timing and positioning. |
| Patch Status | As of the latest updates, these glitches may still work but are unofficial exploits. |
| Difficulty | Easier than direct combat, especially for solo players. |
| Risk | Low, as the player remains safe from most attacks. |
| Community Usage | Widely known and used in speedruns or for farming loot. |
Explore related products
What You'll Learn
Exploit the Arena's Layout
The Digistruct Peak arena's layout is your greatest ally when cheesing assassins. Focus on the elevated platforms and narrow corridors. Assassins struggle with verticality and tight spaces, often getting stuck or unable to navigate effectively. Position yourself on a high platform, ideally near a corner, and lure the assassins below. Their AI prioritizes direct paths, so they'll cluster beneath you, making them easy targets for splash damage weapons like the Tornado or Norfleet.
To maximize this strategy, equip a weapon with high area-of-effect damage and a fast reload. The Tornado's grenade projectiles bounce and explode on impact, decimating grouped assassins. Alternatively, the Norfleet's rocket barrage can clear waves in seconds. Pair these weapons with a shield that boosts splash damage, like the Neogenator or Rough Rider, for added efficiency. Remember to keep moving between shots to avoid taking damage from stray attacks.
A lesser-known trick involves using the arena's boundaries to your advantage. Assassins often spawn near the edges of the map, and their pathing can be manipulated by standing in specific locations. For instance, positioning yourself near the far-right corner of the arena forces assassins to approach from a single direction, funneling them into a choke point. Combine this with a shotgun like the Conference Call or a high-damage sniper rifle like the Lyuda to pick them off as they emerge.
Finally, don’t underestimate the power of environmental hazards. The arena’s lava pits can be turned into weapons. Lure assassins toward the edges of the platforms and use knockback abilities or weapons like the Flakker to push them into the lava. This tactic works best with Maya’s Phaselock or Gaige’s Anarchy stacks, which increase crowd control and damage output. Just be cautious not to get too close to the edge yourself, as assassins can knock you off with their melee attacks.
By exploiting the arena’s layout, you transform Digistruct Peak from a daunting challenge into a controlled environment where assassins become predictable targets. Master these techniques, and you’ll cheese your way to victory with ease.
Halal Milk and Cheese: Understanding Certification and Dietary Compliance
You may want to see also
Use Axton's Turret for Cover
Axton's turret isn't just a damage dealer—it's a mobile fortress. In Digistruct Peak, where Assassins teleport and flank relentlessly, this turret becomes your lifeline. Its aggro-drawing power redirects enemy fire, giving you precious seconds to reposition, reload, or unleash your own attacks without becoming a pincushion.
Think of it as a decoy with teeth, a sacrificial lamb that buys you time and space to dismantle the Assassin swarm.
Deploying the turret effectively requires strategic placement. Don't plop it down in the open, where it'll be instantly shredded. Instead, position it near cover, ideally at a choke point or flanking route Assassins are likely to use. This forces them to engage the turret first, funneling their aggression into a controlled area. Remember, the turret's primary role here isn't damage output, but distraction and crowd control.
Maximize its survivability by keeping it out of splash damage zones and ensuring it has clear lines of sight to incoming enemies.
While the turret holds aggro, capitalize on the opening. Focus on high-damage, single-target abilities or weapons to pick off Assassins one by one. Don't get greedy; prioritize survival over damage. If the turret goes down, immediately fall back to a safe position and reassess. Remember, this is a war of attrition, and Axton's turret is your best tool for tipping the scales in your favor.
This tactic shines in later rounds when Assassins become faster and more aggressive. The turret's ability to draw fire and disrupt their attack patterns becomes invaluable. Combine it with Axton's other skills, like Guerrilla for increased turret health and Nuke for area denial, to create a formidable defensive network. With practice and strategic placement, Axton's turret transforms Digistruct Peak's Assassin gauntlet from a nightmare into a manageable, even enjoyable, challenge.
Easy Steps to Replace the Wire on Your Wood Cheese Board
You may want to see also
Maya's Phaselock Stun Tactic
Maya's Phaselock ability can be a game-changer when tackling the formidable Assassins in Digistruct Peak. This tactic leverages Maya's unique skill to immobilize enemies, providing a crucial window of opportunity to deal damage without retaliation. By understanding the mechanics and timing of Phaselock, players can effectively "cheese" the Assassins, turning a challenging encounter into a manageable one.
Execution and Timing: To execute this tactic, position Maya within Phaselock range of an Assassin, typically around 15-20 meters. Activate Phaselock when the Assassin is not in the middle of an attack animation, as this increases the chances of a successful lock. The stun duration lasts approximately 5-6 seconds, during which the Assassin is completely vulnerable. Coordinate with your team to maximize damage output during this window. A well-timed Phaselock can disrupt the Assassin's aggressive combos, preventing them from dealing massive damage to your group.
Strategic Advantages: One of the key advantages of this tactic is its ability to control the battlefield. By stunning an Assassin, you not only neutralize its threat but also create a safer environment for your team to focus on other enemies or revive downed allies. This is particularly useful during the final wave when multiple Assassins spawn simultaneously. Prioritize stunning the Assassin with the highest health or the one closest to your team to minimize incoming damage.
Cautions and Limitations: While Maya's Phaselock is powerful, it’s not without limitations. The ability has a cooldown of 18 seconds, meaning it can’t be spammed continuously. Additionally, Assassins have a chance to resist Phaselock, especially at higher levels, so always have a backup plan. Over-reliance on this tactic can lead to complacency, leaving your team vulnerable if the stun fails. Combine Phaselock with other crowd-control abilities, such as Axton's turret or Zer0's deception, for added effectiveness.
Practical Tips: To optimize this tactic, invest in skills that enhance Phaselock's duration and effectiveness, such as "Sub-Sequence" and "Res." Equip Maya with gear that boosts cooldown rate or shield capacity to sustain prolonged battles. Communicate with your team to ensure everyone is ready to capitalize on the stun window. Practice the timing of Phaselock in less intense scenarios to build muscle memory, making it easier to execute under pressure.
By mastering Maya's Phaselock stun tactic, players can significantly reduce the difficulty of the Assassins in Digistruct Peak. This method not only showcases Maya's utility in endgame content but also highlights the importance of strategic ability usage in Borderlands 2. With proper coordination and practice, this tactic can become a reliable tool in your arsenal for tackling even the toughest challenges.
Converting Ounces to Grams: How Much is 3 Ounces of Cheese?
You may want to see also
Explore related products
Krieg's Buzz Axe Rampage
In the chaotic world of Digistruct Peak, where assassins lurk around every corner, Krieg's Buzz Axe Rampage emerges as a brutal yet effective strategy to turn the tide. This approach leverages Krieg's unique skill set, transforming him into a whirlwind of destruction that leaves assassins scrambling for survival. By focusing on maximizing buzz axe damage and mobility, players can create a near-unstoppable force capable of dominating even the most challenging encounters.
To execute the Buzz Axe Rampage effectively, start by investing heavily in Krieg's "Blood-Filled Guns" and "Fuel the Rampage" skills. These enhance his buzz axe damage and sustain his rampage mode, ensuring prolonged periods of invulnerability and increased attack speed. Equip Krieg with a high-damage buzz axe and a shield that boosts melee capabilities, such as the "Rough Rider" for its shock damage or the "Spiky Shield" for additional melee spikes. During combat, activate rampage mode by taking damage, then charge into groups of assassins, spinning the buzz axe in a frenzy. This method not only deals massive damage but also disrupts enemy formations, making it harder for assassins to coordinate their attacks.
One of the key advantages of this strategy is its scalability. Whether facing single assassins or swarms, Krieg's buzz axe rampage adapts seamlessly. For solo targets, focus on critical hits by timing your spins to exploit openings. Against groups, prioritize area-of-effect damage by staying in the thick of combat, letting the buzz axe's wide arc cleave through multiple enemies at once. Pair this with Krieg's "Release the Beast" skill for added survivability, allowing him to shrug off damage while maintaining aggression.
However, this approach isn't without risks. Over-reliance on melee combat leaves Krieg vulnerable to ranged assassins or those with high burst damage. To mitigate this, maintain situational awareness and use cover strategically when not in rampage mode. Additionally, ensure your team provides support through crowd control or healing abilities, as Krieg's rampage can sometimes lead to reckless positioning. With practice, Krieg's Buzz Axe Rampage becomes a reliable cheese tactic, turning Digistruct Peak's assassins into mere speed bumps on the path to victory.
PMMA and Cheese: What You Need to Know Post-Procedure
You may want to see also
Sal's Turret Distraction Strategy
In the high-stakes arena of Digistruct Peak, where every second counts and every enemy is a threat, the Sals Turret Distraction Strategy emerges as a cunning tactic to outmaneuver the relentless assassins. This method leverages the environment and AI behavior to create a window of opportunity, allowing players to focus on objectives without constant harassment. By strategically placing a turret near the assassins’ patrol routes, you can divert their attention, effectively neutralizing their immediate threat. The key lies in understanding the assassins’ aggro mechanics and the turret’s engagement range, ensuring the distraction is both effective and sustainable.
To execute this strategy, begin by equipping Salvador with a turret-deploying skill, such as the "Scorpio Turret" from the Gunzerker skill tree. Position the turret in a location where it can aggro the assassins but remains out of their immediate lethal range. Ideal spots include elevated areas or corners near their patrol paths. Once deployed, the turret will draw the assassins’ fire, forcing them to engage it instead of hunting you. This buys you precious seconds to either escape, revive teammates, or complete objectives. Remember, timing is critical—deploy the turret just as the assassins are approaching to maximize its distraction potential.
A comparative analysis reveals the superiority of this strategy in certain scenarios. Unlike direct combat, which often results in heavy damage or death, the turret distraction minimizes risk by shifting the assassins’ focus. It’s particularly effective in solo runs or when teammates are downed, as it provides a temporary reprieve without requiring prolonged engagement. However, this tactic is not without limitations. Turrets have finite health and can be destroyed if left unattended, so monitor their durability and redeploy as necessary. Additionally, this strategy works best in areas with clear lines of sight, as obstacles can hinder the turret’s effectiveness.
For optimal results, pair the Sals Turret Distraction Strategy with other tactics. For instance, combine it with the "Bee Shield" to reflect damage back to the assassins while they’re distracted. Alternatively, use a long-range weapon to pick off assassins from a safe distance while they’re preoccupied with the turret. Practical tips include upgrading the turret’s health and damage in the skill tree and carrying multiple turret-deploying weapons for quick redeployment. With practice, this strategy becomes second nature, transforming Digistruct Peak’s assassins from formidable foes into manageable nuisances.
Craving Cheese? Indulge in a Decadent Hunk of Cheesy Bliss
You may want to see also
Frequently asked questions
The most common method is to use the "ledge glitch" where you position yourself on a ledge or corner that the assassins cannot reach, allowing you to shoot them safely from a distance.
Characters with long-range abilities like Zer0 (sniper builds) or Maya (Chain Reaction + Cataclysm) are ideal, as they can deal damage from a safe distance while avoiding melee attacks.
Yes, using weapons with high damage and range, such as the Lyuda or Pimpernel sniper rifles, or builds that focus on splash damage (e.g., Axton's turret or Gaige's Anarchy stacks) can make cheesing easier.
The room with the first wave of assassins often has corners or ledges near the entrance where you can position yourself to avoid their attacks while picking them off one by one.
If they get close, use mobility skills like Phase Shift (Maya) or Phase Strike (Zer0) to create distance, or use crowd control abilities like Axton’s turret or Gaige’s Deathtrap to distract them while you reposition.
